How to make a pro tripod?

The use of pro tripods requires attention to stability, height adjustment, and accessory matching. The following are the key points:
Height adjustment and stability
Before use, the working height should be adjusted according to the height (the optimal height for use is 30 centimeters less than the height), and adjusted step by step to the appropriate position through the joystick. When unfolding the foot tube, it is necessary to stretch it to the maximum extent and fix it to ensure that the tripod is stable and does not shake. When shooting, aim one foot tube towards the direction of the lens and the other two feet towards the operator to avoid collision.  ‌
Installation and inspection of accessories
When installing the camera, use a quick release plate to secure the bottom of the camera and ensure that the screws are tightened. When adjusting the pan tilt angle, it is necessary to lock the level bubble to avoid the device tilting and affecting the stability of the image during shooting. Before shooting, it is necessary to confirm again whether all fixed components are tightened.  ‌
Extended Function Application
Some tripods support quick height adjustment (such as button fine-tuning), or can increase weight and stability by removing hooks. If low angle shooting is required, the pan tilt support rod can be inverted or the camera can be remotely operated using a mobile app.  ‌
Folding and Storage
When storing, fold the foot tubes in order and invert the head to avoid structural damage caused by hard pulling. It is recommended to carry accessories such as shutter cables and damping handles for daily use to improve operational convenience.  ‌